Armadeus: Difference between revisions
→Real-time clock: link to datasheet |
More devices to be integrated. |
||
| Line 3: | Line 3: | ||
==Integration board== | ==Integration board== | ||
The Armadeus board has two big connectors (Hirose | The Armadeus board has two big connectors (Hirose 120 pin [http://www.hirose-connectors.com/connectors/H205SeriesGaiyou.aspx?c1=FX8&c3=3 FX8]) and need to be plugged on a main board through these two connectors to communicate with the outside world, and more simply, with electrical power. Armadeus developed a few [http://www.armadeus.com/english/products-development_boards-apf27_dev.html development boards]. They include lots of input/output capabilities, power management, and so on. | ||
For our goal, we need to develop a new main board, with a reduced size and weight compared to the Armadeus' development board, and with only the needed external connectors and components. On this page, we make the list of those needed connectors and design constraints. | For our goal, we need to develop a new main board, with a reduced size and weight compared to the Armadeus' development board, and with only the needed external connectors and components. On this page, we make the list of those needed connectors and design constraints. | ||
| Line 9: | Line 9: | ||
===Real-time clock=== | ===Real-time clock=== | ||
The RTC device is used to keep track of the time in case of power interruption or reboot. The DevFull board from Armadeus embeds one, the [http://www.maxim-ic.com/datasheet/index.mvp/id/3806 Maxim DS1374]. It uses the I²C bus and has an internal temperature-compensated oscillator. Datasheet is uploaded [[media:Datasheet_DS1374.pdf|here]]. | The RTC device is used to keep track of the time in case of power interruption or reboot. The DevFull board from Armadeus embeds one, the [http://www.maxim-ic.com/datasheet/index.mvp/id/3806 Maxim DS1374]. It uses the I²C bus and has an internal temperature-compensated oscillator. Datasheet is uploaded [[media:Datasheet_DS1374.pdf|here]]. | ||
===SD card=== | |||
We might need an SD card for massive storage of sensor and flight information. The default is 256MB on the [http://www.armadeus.com/english/products-processor_boards-apf27.html APF27] processor board. | |||
===ADC=== | |||
An ADC may be needed if analogic sensors are used. On the Armadeus DevFull board, they use the MAX1027 component. | |||
===Camera module=== | |||
Camera modules can't be directly connected to APF signals, but need a breakout board. Moreover, since they need to be put in a different place than the processing board, they need a connector on the main board. | |||
Revision as of 14:38, 23 October 2010
Armadeus single circuit board
Integration board
The Armadeus board has two big connectors (Hirose 120 pin FX8) and need to be plugged on a main board through these two connectors to communicate with the outside world, and more simply, with electrical power. Armadeus developed a few development boards. They include lots of input/output capabilities, power management, and so on.
For our goal, we need to develop a new main board, with a reduced size and weight compared to the Armadeus' development board, and with only the needed external connectors and components. On this page, we make the list of those needed connectors and design constraints.
Real-time clock
The RTC device is used to keep track of the time in case of power interruption or reboot. The DevFull board from Armadeus embeds one, the Maxim DS1374. It uses the I²C bus and has an internal temperature-compensated oscillator. Datasheet is uploaded here.
SD card
We might need an SD card for massive storage of sensor and flight information. The default is 256MB on the APF27 processor board.
ADC
An ADC may be needed if analogic sensors are used. On the Armadeus DevFull board, they use the MAX1027 component.
Camera module
Camera modules can't be directly connected to APF signals, but need a breakout board. Moreover, since they need to be put in a different place than the processing board, they need a connector on the main board.
